|

Aptly named, G7000
model GR0476 is a newly developed mega power 7000W single beam moving head searchlights.
It uses a Xenon 7000W flicker free lamp and a nickel rhodium plated reflector
to give an extraordinary light output. The narrow beam is electronically zoomable
between 1.5° and 16° angles. The housings of both the main unit and
the separate ballast set are weatherproofed to a certified IP44 rating. The
base unit features brake locking wheels and screw jacks for leveling and stabilizing
the unit. Transit locks are provided for PAN and TILT movement. Reinforced aluminum
and galvanized steel body design allows for whichever installation method, upside
down, too. 16 BIT high resolution control over brushless servo motors and latest
technology optical sensors ensure the highest precision on both PAN and TILT
movement. On board or remote DMX 512 signal gives direct access to all functions
including frost soft edge effect and electronic control over dimmer, strobe
and blackout effects. Multiple units can be synchronized also without an external
DMX control desk and demo programs are available for stand alone operation.


TECHNICAL
SPECIFICATIONS
LAMP
SOURCE
Type: Xenon
Wattage(W): 7000
Base: SFAX 30-9,5 SFA 30-B
Lamp life(h): 500
Lumens: 350,000
PROJECTION
Reflector: Nickel-Rhodium plated Ø 400 mm
Angle: 1.5° - 16°
Zoom: motorized
Dimmer: linear 0-100%
Black-out: instant access
Strobe: up to 10 Fps
OPERATION
DMX channels: 7
Lamp ON/OFF
Stand alone: available option
Master / Slave: available option
On Board Control: Led display and selection keys
Pan: 420 degrees
Tilt: 220 degrees
Movement accuracy: 8 and 16 BIT resolution
HOUSING
Reinforced aluminum and galvanized steel chassis and MOPLASTIR REG covers.
Weather protection: IP44 http://www.articulight.com/acc/IPRatings.html
Cooling: forced ventilation
DIMENSIONS
Height: 1,320mm(projector) 499mm (separate ballast)
Width: 797mm (projector) 688mm (separate ballast)
Depth: 797mm (projector) 480mm (separate ballast)
WEIGHT
Main fixture: 113 kgs
Ballast set: 93 kgs
ELECTRICAL SPECIFICATIONS
Imput (V): 200-380 AC Three-phase +N + G
HZ: 50-60
AMP: 16 (380V) - 32 (220V)
CE listed
OPERATING TEMPERATURE
-15°C + 35°C
DUE TO CONTINUOUS
IMPROVEMENTS, SPECIFICATIONS MAY CHANGE WITHOUT PRIOR NOTICE.
|