LED Series
  Architectural
Color Changers
  Graphic Projectors
  Searchlights
  Intelligent Lighting
   Control Systems

Architectural Color Changers

 

DOLOMITE 600
IP65 Architectural CYM Color Changer

PDF Link

DOLOMITE 600 is a 2004 newcomer, further expanding the choice for color changers in the architectural line. The short arc MSD 575 lamp, combined with the 35° ellipsoidal optical system the unit is fitted with, produces a narrow concentrated long-throw beam to light adjacent or distant areas with high brightness and even coverage. Options to modify or vary the beam angle are available with additional filters. The high IP65 rating  against water and dust ingress means that the unit is suitable for virtually any exterior or interior application and can be mounted in any orientation. The color mixing system with cyan, yellow and magenta dichroic filters creates virtually unlimited color hues, coupled with smooth blends between color changes. Color sequences and blends can be selected from a preprogrammed internal controller, with multiple unit synchronization possible, or controlled from the IP65 CYM dedicated controller or from any DMX512 control system.

A version of the Dolomite - DOLOMITE 600 HFT is available fitted with a wireless DMX receiver, for trouble free control of large or otherwise difficult installations where the running of DMX signal cable from the control system to the projector could be problematic. This system requires the use of our wireless DMX transmitter.
IP Rating: http://www.articulight.com/acc/IPRatings.html

 

TECHNICAL SPECIFICATIONS

LAMP
575 W, 43,000 lumens, 6,000°K
Discharge lamp MSD 575
Average rated life 3,000 hours
GX 9.5 base
Available on request: MSA 600 lamp (575W), 6000 hours,
40,000 lm, 6000° K

STANDARDS
Pressure diecast aluminum body, with an adjustable mounting yoke. Scratch resistant textured polyester gray finish, which protects against UV deterioration and general corrosion.
Front tempered glass shock resistant.
Certified IP65 weather protection
Electrical class: I
Shock resistance: 0.8 J.
Product in compliance with CEI EN 60598-1 and CEI EN 60598-2-17.

OPTICAL GROUP
The optical system utilizes an aluminum ellipsoidal reflector and produces a beam of approximately 35°. Additional filters are available for alternative beam adjustments.

COLOR CHANGER SYSTEM
CYM color changer system operated by high precision step motors, whereby the mixing of cyan, yellow and magenta dichroic filters can create virtually any desired color.

BLACKOUT
Variable speed black out effect. Linear 0-100% dimmer function. 2.6 FpS strobe maximum speed.

CONTROL
Internal controller with a choice of eight preprogrammed color change sequences, any of which can be easily selected from a rear mounted dip switch control panel. Master/slave option for multi unit synchronization. The dedicated IP65 CYM controller gives full remote programmed control, or any DMX512 controller can be linked five channels of DMX per projector. Remote lamp on/off function.

COOLING
Two internal axial fans (80x80 mm and 120x120 mm) keep the level of heat within the unit constant and help dissipation through the metal body, which assists lamp life and protects internal components and reflectors from heat damage.

POWER SUPPLY
230 V, 50/60 Hz, 3.5 Amp (other versions available upon request).

WEIGHT
BODY: 14.5 kgs; BALLAST: 12.5 kgs

DIMENSIONS
L509 x W411 x H558 mm

MODELS
AD3436 DOLOMITE 600
AD3437 DOLOMITE 600 HFT

Obs Shopping Mall, Sweden

DUE TO CONTINUOUS IMPROVEMENTS, SPECIFICATIONS MAY CHANGE WITHOUT PRIOR NOTICE.



Articulight, Inc.
15-06 Morlot Avenue, Fair Lawn, NJ 07410 USA     Tel: (201) 796-2690  Fax: (201) 796-8818
info@articulight.com       articulight@aol.com           www.articulight.com

LED Series  | Architectural Color Changers  Graphic Projectors  |  Searchlights  |  Intelligent Lighting  |  Control Systems

Home  | About Us  |  Contact Us  |  Sitemap 

Copyright 1998-2008 Articulight, Inc.  - All rights reserved.