Aptly named, the MAX 2™ model 4200PR is a new moving head high
power CYM narrow variable single beam color changer searchlight.
This concept in such a high lamp power fixture is almost unique
and the combination of moving beam and color change provides a
truly spectacular display that would be a highlight for any
permanent or temporary event.
MAX 2™ shares the same lamp and color change assembly as the
static beam , and uses the same Xenon 2000W flicker free lamp
with nickel rhodium plated reflector to give an extraordinary
light output, further enhanced by the narrow angle beam,
zoomable between 13-22 degrees. The CYM color mixing system
gives an enormous range of color hues, and the unit is certified
to an IP20 rating and so is specifically designed for exterior
The base unit features brake locking wheels and screw jacks for
leveling (assisted by onboard spirit level) and stabilizing the
unit, transit locks are provided for the pan and tilt movement
and the unit is designed for reliability even in tough use,
being built from aluminum and galvanized steel with scratch
resistant textured polyester black finish.
The high technology lamp and color changing/zoom optics section
from our searchlights is already proven, but the same attention
to detail has been paid to the new base unit, and, for example,
brushless servo motors are used for the pan and tilt movement to
ensure high reliability and precision.
Onboard or remote DMX512 gives access to all functions, which
include frost soft edge effect, blackout, dimmer, strobe and
standby. Although it is likely that this unit will normally be
run by external DMX (13 channels required), on board
preprogrammed color sequences plus a movement demo program means
that the unit could be used in a stand alone mode.
The outstanding MAX 2™ has huge creative possibilities, both
with architectural and color changing sky projector applications
as well as with live event use, and this wide range of abilities
make the unit ideal for rental companies as well as for fixed
installation in large scale concepts.
Extraordinary output is given also by its nickel rhodium plated
reflector. The CYM color mixing system gives a rich range of
color hues. Shooting distance is up to 3 kilometers (1.875
The MAX 2™ comes with a bulb and a flightcase.
Lamp: XQ2000 xenon, 2000w, Double ended; 800 hours, 6000 degrees
K color temperature
Color System: Full CYM color mixing, unlimited variety of colors
and shades - High resolution stepper motors . - Color crossfades
can be programmed at four different speeds or in real time
Dimmer/Shutter/Strobe: Smooth dimmer from 0% to 100% ; Blackout,
Strobe: 1-17 Fps
Focus: DMX controlled
Zoom and Beam Angle: 13-22 degrees, adjustable.
Frost: Frost filter for diffused beam effect; DMX controlled
0-100% smooth adjustable
Pan: 400 degrees, position auto correction, microstep 8/16 bit
Tilt: 250 degrees, position auto correction, microstep 8/16 bit
with photoelectric positioning for 16 bit resolution
DMX Channels: 13 or 10
Control Options: DMX 512. 10 Channels in short mode; 13 channels
in standard mode. 3 pin and 5 pin DMX 512 interface. Stand alone
automatic, master/slave, on-board control, remote control
Power Requirements: 220-230-240 v/50-60Hz. Rated Power: 2650w
IP Rating: IP 20
Standards: In conformity with CE standard and ROHS directive
Cooling: Very quiet convection and forced cooling
Dimensions: See Below. Packed: L 71 x W 66 x H 104 cm (27.95 x
25.98 x 40.94 inch)
Net Weight: 58 kgs (127.6 lbs)
Finish: Metal, black
Projection Distance: Up to 3 kilometers (1.875 miles)
Other Functions: Programmable function; Pan and tilt speed
adjustable: Display shows lamp and projector hours; Overheating
protection; LCD display, brightness and contrast adjustable.
DUE TO CONTINUOUS IMPROVEMENTS, SPECIFICATIONS MAY CHANGE
WITHOUT PRIOR NOTICE.