Colosseo OS CYM 1000 shares the same benefits as the standard
model, but with a different optical system producing a narrower beam to cover
long distances such as very tall structures without problem. A manually
adjustable zoom facility gives a fully variable beam angle from 17° to 32° with
the obvious benefits this provides. One expansion filter is available for
additional beam adjustment. As with the standard unit, color sequences can be
selected from a pre-programmed internal controller, with multiple unit
synchronization possible, or controlled from the IP65 CYM dedicated controller,
or from any DMX512 control system.
***See Application Photos in Nancy, France***
A version of the Colosseo - COLOSSEO OS CYM 1000 HFT - is available fitted with
a wireless DMX receiver, for trouble free control of large or otherwise awkward
installations where the running of DMX signal cable from the control system to
the projector could be problematic. This system requires the use of our wireless
1000W, 90000 lm, 5900°K
Metal halide lamp HQI-TS/D/S 1000
Average rated life 6000 hours
Pressure diecast aluminum body, with an adjustable mounting yoke.
Scratch resistant textured polyester grey finish, which protects against
UV deterioration and general corrosion.
Front tempered glass shock resistant.
Certified IP65 weather protection
Electrical class: I .
Shock resistance: 0.8J.
Maximum ambient temperature: 35°C.
Maximum operational temperature: 90°C.
Product in compliance with CEI EN 60598-1 and CEI EN 60598-2-5.
Patented optical system with grouped planar mirrors, producing a beam of
approximately 58ºx62° with soft edge and even lighting coverage.
Color Changing System
CYM color changer system operated by high precision step motors,
whereby the mixing of cyan, yellow and magenta dichroic filters can
create virtually any desired color.
Internal controller with a choice of eight pre-programmed colour change
sequences, any of which can be easily selected from a rear mounted dip
switch control panel. Master/slave option for multi unit synchronisation.
The dedicated IP65 CYM controller gives full remote programmed control,
or any DMX 512 controller can be linked - three channels of DMX per
An internal axial fan 120x120 mm keeps the level of heat within the unit
constant and helps dissipation through the metal body, which assists
lamp life and protects internal components and reflectors from heat
230V, 50Hz, 1,7 Amp. Thermal protection.
IP65 certified termination box for the entry of both the 220-240V power
supply cables (ballast unit) and the DMX signal cables.