EVEREST 900 is another
of the 2004 newcomers to the expanding Architectural Dimension range. This unit
uses the same housing as the Colosseo OS CYM 1000, and, due to the greater output
of the MSD700 lamp, is an even more powerful alternative to the Colosseo. Standard
7º optics will produce an ultra narrow beam for great distances, the only
trade off being a less smooth mix of color changing at closer projection distances,
due to the more focused image. However, with the simple installation of the
included diffusion glass and the manually adjustable zoom between 17° and
24° the projector is by itself highly suitable for long distance coverage.
This ultra bright, ultra narrow beam ability is probably unique from an IP 65
rated color changer and will give lighting designers and specifiers opportunities
not previously available to them. Other beam angles can also be achieved with
optional additional filters. Color sequences and blends can be selected from
a preprogrammed internal controller, with multiple unit synchronization possible,
or controlled from the IP65
CYM dedicated controller or from any DMX512 control
system. A version of the Everest - EVEREST 900 HFT – is available fitted with
a wireless DMX receiver, for trouble free control of large or otherwise awkward
installations where the running of DMX signal cable from the control system
to the projector could be problematic. This system requires the use of our wireless
700 W, 50,500 lumens, 6,000 °K
Discharge lamp MSD 700
Average rated life 3,000 hours
G 22 base
Pressure diecast aluminum body, with an adjustable mounting yoke. Scratch resistant
textured polyester gray finish, which protects against UV deterioration and
Front tempered glass shock resistant.
Certified IP65 weather protection
Electrical class: I
Shock resistance: 0.8 J.
Product in compliance with CEI EN 60598-1 and CEI EN 60598-2-17.
The optical system utilizes an aluminum parabolic reflector
to produce a 7° hard edge beam. A soft edge beam between 17° and 24°
is available by the installation of an additional diffusion glass included and
a manual zoom adjustment.
Additional filters are available for alternative beam adjustments.
CYM color changer system operated by high precision step motors, whereby the
mixing of cyan, yellow and magenta dichroic filters can create virtually any
Variable speed black out effect. Linear 0-100% dimmer function. 2.6 FpS strobe
Internal controller with a choice of eight preprogrammed color change sequences,
any of which can be easily selected from a rear mounted dip switch control panel.
Master/slave option for multi unit synchronization. The dedicated IP65 CYM controller
gives full remote programmed control, or any DMX512 controller can be linked
five channels of DMX per projector. Remote lamp on/off function.
An internal axial fan 120x120 mm keeps the level of heat within the unit constant
and helps dissipation through the metal body, which assists lamp life and protects
internal components and reflectors from heat damage.
230 V, 50/60 Hz, 5.8 Amp (other versions available upon request).
L579 X W540 X H550MM
UNIT: 27KGS; BALLAST; 14KGS
AD3462 Everest 900
AD3463 Everest 900 HFT
DUE TO CONTINUOUS
IMPROVEMENTS, SPECIFICATIONS MAY CHANGE WITHOUT PRIOR NOTICE.