CYM 250 shares the same benefits as the standard model, but with a
different optical system producing a much narrower beam of approximately 17°
to light less area but with greater reach suitable for example for taller buildings
or to highlight smaller areas.
An expansion filter
can be added for an alternative 68°x 23° beam angle . As with the standard
unit, colour sequences can be selected from a pre-programmed internal controller,
with multiple unit synchronisation possible, or controlled from the IP65 CYM
dedicated controller or from any DMX512 control system.
A version of the Vesuvio
- Vesuvio CYM 250 HFT- is available fitted with a wireless
DMX receiver, for trouble free control of large or otherwise awkward installations
where the running of DMX signal cable from the control system to the projector
could be problematic. This system requires the use of our wireless DMX transmitter.
250W, 20000 lm, 5100°K
Metal halide lamp HQI-TS 250/D UVS
Average rated life 6000 hours
FC 2 ceramic base.
Pressure diecast aluminium body, with an adjustable mounting yoke. Scratch
resistant textured polyester grey finish, which protects against UV deterioration
and general corrosion.
Front tempered glass shock resistant.
Certified IP65 weather protection
Electrical class: I.
Shock resistance: 0.8J.
Maximum ambient temperature: 35°C.
Maximum operational temperature: 90°C.
Product in compliance with CEI EN 60598-1 and CEI EN 60598-2-5.
The optical system utilises an aluminium parabolic reflector and produces
a soft edge beam of approximately 17°
CYM colour changer system operated by high precision step motors, whereby
the mixing of cyan, yellow and magenta dichroic filters can create virtually
any desired colour.
Internal controller with a choice of eight pre-programmed colour change
sequences, any of which can be easily selected from a rear mounted dip
switch control panel. Master/slave option for multi unit synchronisation.
The dedicated IP65 CYM controller gives full remote programmed control,
or any DMX 512 controller can be linked - three channels of DMX per projector.
An internal axial fan 80x80 mm keeps the level of heat within the unit
constant and helps dissipation through the metal body, which assists lamp
life and protects internal components and reflectors from heat damage.
230V, 50Hz, 1,7 Amp
IP65 certified termination box for the entry of both the 220-240V power
supply cables and the DMX signal cables.