Dive into the water with the LED AQUA fixtures that bring
beautiful color and color changing lighting to any type of underwater locations.
The LED AQUA fixtures are a solution for outdoor and underwater
installations.
Because of the advance LED technology, the LED AQUA does not require filters
or mechanical parts. There is no danger of overheating, the fixtures do not need
servicing and last for 100,000 hours.
Applications include (all outdoors/indoors use)- but not limited to- gardens,
parks, fountains, aquariums, swimming pools, and ponds.
LED AQUA is a high power water submersible LED lighting fixture, which is an
ideal fixture for both indoor and outdoor applications requiring full color
mixing capabilities, such as fountain, pool, theme park, exhibition, commercial
and architectural illuminations. For best heat dissipation, the LED AQUA is
recommended to be used underwater. LED AQUA has a protection rating exceeding
IP68
http://www.articulight.com/acc/IPRatings.html
, which is suitable for submersion up to 2 meter underwater. A proprietary
triple water proofing technology is used, making water intrusion impossible.
The beam angle of LED AQUA is 25° but other beam angles are also
available. The fixture can be controlled by any DMX controller. Each unit is
individually addressable and requires 3 DMX channels corresponding to red,
green, and blue respectively. Full color mixing is achieved by varying intensity
of each primary color. Up to 16.7 million colors can be produced.
LED AQUA uses the highest quality and high brightness LEDs as light source
with typical LED life up to 100,000 hours. Each unit consists of 360 LEDs (120
red, 120 green, 120 blue). The LED AQUA circuitry is engineered to optimize both
led life and performance.
A proprietary power and data distribution system is used to
minimize wiring. The whole system includes a DMX controller, a switching power
supply, a submersible junction box, and LED AQUA fixtures. The junction box
dramatically reduces cable runs and provides power and data distribution.
LED AQUA has a stainless steel / cast aluminum housing with adjustable yoke
and base. The housing is designed to work in water treated with bromine and
chlorine.
LED AQUA is available in three versions for different customer’s
budget:
A. DELUXE PROFESSIONAL – LA-DIA220-12V-PI-A stainless steel
casting / ultra bright LED provided with 10 meter cable.
B. PROFESSIONAL – LA-DIA220-12V-PI-B aluminum casting / ultra bright LED
provided with 10 meter cable.
C. CONVENTIONAL – LA-DIA220-12V-PI-C aluminum casing / super bright LED
provided with 10 meter cable .
Specifications:
| Color Range: |
16.7 million colors at 24 bit RGB
additive color mixing |
| Light Source: |
360 high-powered LED |
| Beam Angle: |
25° standard: 10, 45, 60 and 90 degrees are also
available with higher lead time |
| Signal transferring format: |
standard DMX protocol (RS485 terminal) |
| Control system: |
“DMX console + power switch + distributor” or
“SRC-AI-100 Address Writer + power switch + distributor. |
| DMX address: |
Generated by SRC-AI-100 Address Writer. |
| Housing: |
stainless steel or aluminum (see specifications of
various models) |
| Connector: |
3-pin signal connector |
| Dimensions: |
L255xW180xH245.4mm |
| Weight: |
9 kgs. |
Electrical Specifications:
| Operating Voltage: |
12V DC |
| Power Consumption: |
25W |
Environmental Specifications:
| Operating Temperature: |
-20°C - 55°C |
| Protection Rating: |
IP68 |
| Submersion Depth: |
400mm – 2000mm depending on model |
| Sustainable Pressure: |
0.0533T/mm |
Color Effects:
| Fixed Color: |
single static color display |
| Color Wash: |
color change |
| Cross Change: |
two color cycles |
| Random Change: |
colors change in random order |
| Fixed Color Strobe: |
a rapid strong flash of light of a single color |
| Variable Color Strobe: |
a sequence of color appears in a series of strong
flashes of light |
Assembling of the junction box
Wiring of the power supply case
LW-DIA-JP
|
LED AQUA
COMBO OF SWITCH POWER
SUPPLY CASE PLUS
DISTRIBUTOR/JUNCTION BOX; RUNS
MAXIMUM 6 LED AQUA
37x30x12cm
Weight: 10 Kgs
In order to run your LED AQUA you
need one set of PSU & Distributor for each 6 pieces
LED AQUA. The PSU contains the power supply and
gives the necessary power to all the LED AQUA.
Moreover the PSU contains the DMX input and output
to control your LED AQUA. The PSU has a
protection-degree of IP-44 and can be mounted
indoors as well outdoors.
|
LW-UW-DIA220-12V-PROOVE-B
|
LED AQUA
SWITCH POWER SUPPLY CASE.
CONTROLS 24 LED AQUA
L530MM X W480MM X H190MM,
|
LW-UW-DIA220-12V-PROOVE
|
LED AQUA
DISTRIBUTOR WITH ONE POWER
SUPPLY
L180MM X W145MM X H70MM
1 pc input
cable (15M) + 6 pcs output cables (10M/pc)
|
LW-UW-DIA220-12V-PROOVE-C
|
LED AQUA
SWITCH POWER SUPPLY CASE.
CONTROLS 6 LED AQUA
L300MM X W245MM X H95MM
1
pc input power cord (1.2M) + 1 pc output cable(15M)+
2 pc signal cables(1.2M/pc) |
LW-UW-DIA220-12V-PROOVE-C
|
LED AQUA
SWITCH POWER SUPPLY CASE.
CONTROLS 6 LED AQUA
L300MM X W245MM X H95MM
1
pc input power cord (1.2M) + 1 pc output cable(15M)+
2 pc signal cables(1.2M/pc) |
DUE TO CONTINUOUS IMPROVEMENTS, SPECIFICATIONS MAY CHANGE
WITHOUT PRIOR NOTICE.
