LED Series
  Architectural
Color Changers
  Graphic Projectors
  Searchlights
  Intelligent Lighting
   Control Systems

LED Series

 

LINOCOLOR CRYSTAL RGB
Color Changing Translucent Linocolor
 

PDF Link

Linocolor, neon lights, replace glass neon, outdoor linear light- image

Another technology breakthrough for a subcategory of LINOCOLOR family is our newly developed LINOCOLOR CRYSTAL RGB, Instead of employing a milky jacket, the new flex will be extruded by a transparent jacket with better reflective material. it this permits the LED fully emitting its inherent lumen with faceted diamond look. However, if viewing from a certain distance, say 40 meter, the LINOCOLOR CRYSTAL RGB still provides an even distribution of light along the entire strip. With fashionable design and illuminating high brightness, new version the LINOCOLOR CRYSTAL RGB has been established a new page for linear lighting and it would have satisfied alternate need for all LINOCOLOR fans.

 

Features and Benefits:

1) Translucent and crystal effect, much more bright
2) LINOCOLOR CRYSTAL RGB can be used for accent lighting and it gives no hot spot on appearance at more than 40 meters.

Linocolor, neon lights, replace glass neon, outdoor linear light- image

 

LINOCOLOR CRYSTAL RGB SPECIFICATIONS

MODEL LENGTH IN ROLL DIMENSIONS LED SPACING TOTAL NO. OF LED TOTAL WATTS
LN-FX-RGB-25-240V 24.7m 20 X 26 MM 0.5" 5832 325.7W
LN-FX-RGB-81-120V 81 FT 20 X 26 MM 0.5" 5832 324W
LN-FX-RGB-81-24V 81 FT 20 X 26 MM 0.5" 5832 388.8W
MODEL NO.OF LED PER UNIT CUTTING UNIT WATTS PER METER OR FOOT LED COLOR MAX. LOADING LENGTH LED LIFE
LN-FX-RGB-25-240V 216 .91M 13.2W/M RGB 120 M
WITH SEC-191-3C-240V CONTROLLER
100,000 HRS
LN-FX-RGB-81-120V 108 1.5 FT 4W/FT RGB 200 FT
WITH SEC-191-3C-120V CONTROLLER
100,000 HRS
LN-FX-RGB-81-24V 18 1/4 FT 4.8W/FT RGB 33 FT
WITH SEC-191-3C-24V CONTROLLER
100,000 HRS

Recommended storage & operating temperature: -20°C to 60°C, 100% humidity.

Installing Mode:
The LINOCOLOR RGB is a versatile and user-friendly lighting device. It can be cut, bent and easily installed on the flat surface of various materials, such as wood, plastic, steel, or wall, etc. to form all kinds of pattern according to your design. And it can be easily connected to the power supply and then perform well.
1. It is recommended to mark centerlines or draw the outline of your pattern on the surface of your desired positions.
2. Secure mounting clips along the centerlines at appropriate intervals with screws. If there are curves, it is better to secure a mounting clip on and between each curve.
3. Insert the light body into the mounting clips with the lighting parts upward.
4. Connect each part together.


1. Cutting mark

LN-FX Must be cut only on the
indicated mark

 

2. Linear installation

Includes:
Channel LN-FX-CH

 

3. Curve installation

Includes:
1. Mini channel LN-FX-5
2. Screw

 

4. 90 degrees Installation

Includes:
1. Mini channel LN-FX-5
2. Screw

 

5. 180 degrees Installation

Includes:
1. Mini channel LN-FX-5
2. Screw

 

6. Convex installation

 

7. Concave installation


8. Installation with the slot

DUE TO CONTINUOUS IMPROVEMENTS, SPECIFICATIONS MAY CHANGE WITHOUT PRIOR NOTICE.



Articulight, Inc.
15-06 Morlot Avenue, Fair Lawn, NJ 07410 USA     Tel: (201) 796-2690  Fax: (201) 796-8818
info@articulight.com       articulight@aol.com           www.articulight.com

LED Series  | Architectural Color Changers  Graphic Projectors  |  Searchlights  |  Intelligent Lighting  |  Control Systems

Home  | About Us  |  Contact Us  |  Sitemap 

Copyright 1998-2008 Articulight, Inc.  - All rights reserved.