DANUBE
is the latest LED RGB color changer innovation, using no less than 88 high brightness
LED light sources to achieve a much higher light output than from the standard
units. This extra power is however contained in a remarkably compact unit. Two
versions are available, one with an IP 66 weather protection factor for virtually
any normal exterior application, and the other with an IP20 rating, for interior
use. The interior version has completely silent operation and so is suitable
for theater or television use, but of course would be an ideal light source
in many applications such as retail environments. DANUBE can
be installed in any position and in any orientation, with the compact size and
low weight assisting easy installation. The state of the art LED technology
promises high reliability meaning minimal maintenance, and other advantages
include low power consumption, cool running and a quick light source response
time. Making electrical installation equally straightforward,
DANUBE
has integral power supply unit and on board control, with selectable color sequences,
for stand alone operation, with multiple units able to be linked and synchronized
in this mode. Can also be controlled from any DMX512 controller. The RGB (Red,
Green, Blue) electronic color mixing system gives an extraordinarily rich variety
of color hues. A choice of three different beam angle optics is available, and
these are interchangeable.
TECHNICAL
SPECIFICATIONS
SOURCE
88 high brightness 1.2 W power LED (Light-Emitting Diode) units
Continuously variable light intensity
1-100% electronic dimming facility
No UV
Strobe facility (12 fps)
SOURCE LIFE
The LED Light sources have an exceptionally long life: predicted 100,000 hours
under normal operating conditions, as mentioned by the LED manufacturer.
OPTICS
10 degrees beam angle (ordering code AL 1260 outdoor / AL 1270 indoor)
30° beam angle (ordering code AL 1262 outdoor / AL 1272 indoor)
45° beam angle (ordering code AL 1264 outdoor / AL 1274 indoor)
Optional frost filter for 10° optic version only (ordering code AL 1308)
Optional 10° beam angle (ordering code AL 1324)
Optional 30° beam angle (ordering code AL 1325)
Optional 45° beam angle (ordering code AL 1326)
COLOR VARIETY AND EFFECTS
RGB additive color mixing for countless attractive saturated colors.
Theoretical variety of 16,700,000 color hues
Preset selectable color sequences and blends
Dimmer, blackout and strobe
CONTROL OPERATION
Onboard Dip switch set for digital data assignment and stand alone operation
control
Master and Slave
4 channels of DMX 512 standard protocol
Input and output DMX signal connectors
Remote control (ordering code AL 1320)
IP65 optional dedicated DMX controller (ordering code AL 1322)
20 CH DMX controller (ordering code GR0171)
Power CDI commander - DMX interface for PC (ordering code AD 4118)
ELECTRICAL SPECIFICATIONS
Power Supply:
Standard: 210-250V / 50-60 Hz / 0.15 Amp.
Optional: 90-120V / 50-60 Hz / 0.33 Amp. 200 V / 50-60Hz / 0.17 Amp.
Self-resetting fuse protection
Meets CE safety standards
COOLING
Forced ventilation
Convection, which keeps the level of heat within the unit constant and helps
dissipation through the metal body.
HOUSING
Die cast aluminum body
Scratch resistant silver-gray paint (outdoor version)
Scratch resistant black paint (indoor version)
Easy mounting system for wall, ceiling and floor with full orientation capability
Can operate in any position
WEATHER PROTECTION FACTOR
IP66 version: totally protected against dust, and protected against water jets
from all directions
IP20 version: protected against solid bodies with size bigger than 12 mm, protected
against water downpours falling up to a 60° angle.
EXTERNAL OPERATING LIMITS
0-95% relative humidity (non condensing)
WEIGHT
IP66 Version: 12 Kg
IP20 Version: 12 Kg
MODELS
AL1260 - AL1262 - AL1264 - AL1270 - AL1272 - AL1274
|
