|
Apart from the low voltage versions described above, we can supply LED
PANEL at 110V and 240V. All the excellent features and dimensions of
the low voltage version are maintained with the only difference is that they
run on 110V and 240v.
On the low voltage versions, a power
supply is designed to support 4 to 8 pieces of LED PANEL depending
on the sizes. Power supply unit is not required on High Voltage Versions.
LED
PANEL ACCESSORIES
12V
Power Supply (SDL-109P)
The 12V Power
Supply unit is a dedicated unit to maintain the brightness of the LED
PANEL due to the physical phenomenon of voltage drop when low voltage
units are connected in series. With the screw type easy connector, the 12V
Power Supply is easily positioned to give enough power from 4 to 8
LED PANEL.
LED PANEL
Size Number of LED PANEL per 12V Power Supply Unit
30cm x 30cm 8 pieces
30cm x 60cm 4 pieces
60cm x 60cm 4 pieces
Signal
Amplifier (SDL-109SA)
The Signal
Amplifier is an accessory to ensure the consistency and strength of
each LED PANEL connected in series. With a single signal source,
there is no visible delay effect even connected to the maximum of 500 LED
PANEL.
Specially made for high voltage version,
each Signal Amplifier is installed to support 15 LED
PANEL. For every 45 LED PANEL a separate mains supply
is required. A screw type easy connector is also applicable to the Signal
Amplifier for simple installation purpose.
|
