SDL-109A-T1
signal amplifier is designed to amplify the control signal generated from a
controller to achieve various lighting effects for the LED lighting system.
It consists of a transformer and a signal amplifying board. The amplifier which
is plugged into the signal transmission cable improves the signal which deteriorates
or is distorted during the transmission. With the help of the amplifier, a large
number of LED tubes can be linked in series without compromising the lighting
effects.
1.
Specifications
| Input Voltage: |
AC 240V 50Hz / AC
120V 60Hz |
| Note: |
an appropriate transformer is
needed. |
| Signal Input Connector: |
5-pin male connector |
| Signal Output Connector: |
5-pin female connector(Converting
connecter to connect to 3-pin or 4-pin connector) |
| Protection Rating: |
IP65 |
| Housing: |
ABS UL94-V1 |
| DIMENSIONS: |
144x104x65mm |
| Weight: |
1.25kg (including the transformer) |
2.
Installation of the Unit
| Data Connection: |
DMX512 |
| Controller: |
M/S or DMX512 controller |
| DMX Signal Input: |
3-pin male connector |
3.
Caution Avoid big impact on the unit
The product is waterproof,
but not suitable for under water.
Avoid high temperature which could damage the electronic components in the PCB.
DUE TO CONTINUOUS IMPROVEMENTS, SPECIFICATIONS MAY CHANGE WITHOUT PRIOR
NOTICE.
